DX SABERS LIGHTSABER INSTRUCTIONS: HOW TO USE (BLUE BUTTON BASE LIT RGBX)

Posted by THE DARK JEDI (CXO) on Aug 24th 2022

DX SABERS LIGHTSABER INSTRUCTIONS: HOW TO USE (BLUE BUTTON BASE LIT RGBX)

DX SABERS INSTRUCTIONS: HOW TO USE BLUE BUTTON BASE LIT RGBX)

ASSEMBLY: Take the small bag with the L shaped allen key wrench and the very tiny fastening screws. There are small holes around the top of your lightsaber hilt (handle). Put your blade into your DX Saber Hilt (handle) and screw the small screws into the holes until they are nice and tight against the blade. Then you are ready to go!!

TURN ON SABER: Hold down the button for 3-5 seconds until you hear a noise and the blue circle is lit indicating that it is alive and out of sleep mode.  Then you can simply click the button and the lightsaber will light up! 

VOLUME CONTROL: While the saber is not lit, hold down the button for 1-2 seconds or 1 blink until you hear the saber say "MUTE" OR "LOW VOLUME," or "HIGH VOLUME,"  which indicates that the volume level or if it is muted. 

CHANGE SOUND FONTS: While the saber is not lit, hold down the button for 2-3 seconds or 2 blinks until you hear the next character speak indicating the character's lightsaber sounds you have chosen.

CHANGE COLORS: While the saber is lit up, hold the hold down the button for 2-3 seconds or 2 blinks and let go.  You are now in color change mode and you can casually click the button to change the color from one to the next. Once you find the color you want to select, just hold the button down until the saber becomes unlit and saves your color.  Click the button once more to turn it back on with the color you saved! 

BLASTER REFLECTION EFFECT: While the saber is lit, click the button one time for a blaster reflection effect!

LIGHTSABER FLASH ON CLASH EFFECT: When the lightsaber experiences contact it will emit a noise and a point on the blade where there is an impact showing flash on clash.

LOCKUP (LIGHTSABER AGAINST LIGHTSABER EFFECT): When the lightsaber is lit, hold the button down and the lightsaber will create a lockup effect upon impact and keep the button held to continue the effect! To release the effect just release your finger from the button.

TURN OFF: When the lightsaber is lit, hold the button down for about 5 seconds until it becomes not lit.

SLEEP MODE: When the lightsaber is NOT lit, hold the button down for about 10 seconds until the button is not lit up or it says "the resistance is dead, the war is over," indicating that the lightsaber is in sleep mode and will begin to conserve battery.