​DX SABERS LIGHTSABER INSTRUCTIONS: HOW TO USE BLUE BUTTON NEOPIXEL)

Posted by THE DARK JEDI (CXO) on Aug 24th 2022

​DX SABERS LIGHTSABER INSTRUCTIONS: HOW TO USE BLUE BUTTON NEOPIXEL)

DX SABERS INSTRUCTIONS: HOW TO USE BLUE BUTTON NEOPIXEL)

ASSEMBLY: Take the small bag with the L shaped allen key wrench and the very tiny fastening screws. There are small holes around the top of your lightsaber hilt (handle). Put your blade into your DX Saber Hilt (handle) and screw the small screws into the holes until they are nice and tight against the blade. Then you are ready to go!!

TURN ON SABER: Hold down the button for 3-5 seconds until you hear a noise and the blue circle is lit indicating that it is alive and out of sleep mode.

VOLUME CONTROL: While the saber is not lit, hold down the button for 1-2 seconds or 1 blink until you hear the saber say "MUTE" OR RISE which indicates that the volume is on and not on mute. 

CHANGE SOUND FONTS: While the saber is not lit, hold down the button for 2-3 seconds or 2 blinks until you hear the next character speak indicating the character's lightsaber sounds you have chosen.

CHANGE COLORS: While the saber is lit up, hold the saber pointed up and hold down the button and turn your wrist to the right and it will change the color and or the blade effect. There are tons of blade effects and colors to explore! This is also how you get to the rainbow mode!!!

If your saber is not changing color then it means you have a version 1 core and you are eligible for a free upgrade at any time when we have the cores available.

THEME MUSIC: While saber is not on hold down the button for 3-4 seconds or 3 blinks until you hear theme music. Do the exact same thing to turn it off!

BLASTER REFLECTION EFFECT: While the saber is lit, click the button one time for a blaster reflection effect!

LIGHTSABER FLASH ON CLASH EFFECT: When the lightsaber experiences contact it will emit a noise and a point on the blade where there is an impact showing flash on clash.

LOCKUP (LIGHTSABER AGAINST LIGHTSABER EFFECT): When the lightsaber is lit, hold the button down and the lightsaber will create a lockup effect upon impact and keep the button held to continue the effect! To release the effect just release your finger from the button.

TIP DRAG: When the lightsaber is lit, hold the button down and drag the blade on the floor to create a tip drag effect!!!

TURN OFF: When the lightsaber is lit, hold the button down for about 5 seconds until it becomes not lit.

SLEEP MODE: When the lightsaber is NOT lit, hold the button down for about 10 seconds until the button is not lit up or it says "the resistance is dead, the war is over," indicating that the lightsaber is in sleep mode and will begin to conserve battery.